This pump is a horizontal multistage pressure system pump supplied wired and ready to install. Used especially for supplying water to domestic and commercial installations. 

• Automatic electronic pump control fitted and wired.
• Automatic electronic control provides run dry protection and constant pressure at low flows. Automatic electronic control has auto restart and in-built check valve.
• Corrosion resistant pump body, diffuser and impeller.
• Mechanical shaft seal.
• Stainless Steel barrel union
• Comes complete with plug and play leads.
• 240V single phase TEFC motor with in-built auto reset thermal overload.
• Flow Rate: 70L/m
• Max Head: 55m
• Taps: 7 taps
• Pipe connections suction/discharge: 1 ” BSP F / 1″ BSP M
• Maximum operating pressure: 8 bar

Electrical data:

• Rated voltage: 240V
• Mains frequency: 50 Hz
• Rated output: 750W
• Horse Power: 1.0HP
• Current: 2.6 amps
• Motor duty: Continuous
• Motor Type: Asynchronous, TEFC
• Motor Protection: In-built
• Ingress protection: IP 55
• Insulation class: F
• Power cable length: 1.2 m H07RNF
• Liquid: Clean water temperature range: 2-50 °C
• Materials: Pump body, Diffuser & Impeller = Stainless Steel. Mechanical seal = Carbon/Ceramic/Nitrile. O-rings = Nitrile
• Installation: Maximum ambient temperature: 50 °C